Complete 78mm clutch assembly for use on the GP420 / GP460 engine. These are the most recent version of this clutch from CY, with the red springs...
$39.99
Add:
GP420 / GP460 Clutch Assembly - Yellow Springs 5700 RPM - 42cc or 46cc engines Complete 78mm clutch assembly for use on the GP420 / GP460 engine....
$39.99
Add:
One Clutch Bearing Cup Holder. This bearing cup goes on one end of the clutch shaft.
$24.99
... more info
One Pair of Clutch Bearings. These bearings go on each end of the clutch shaft Fits all BladeZ Moby Scooters and Tanaka Paverunners Moby X 21cc -...
$19.99
Add:
One Clutch Bearing. This bearing goes on each end of the clutch shaft Fits: XL 50 2 Speed 49/50/52 2 Speed Mag Wheel EVO Rx EVO Big Wheel and Mag...
$10.99
... more info
One Clutch Bearing. This bearing goes on each end of the clutch shaft Fits: XL 50 2 Speed 49/50/52 2 Speed Mag Wheel EVO Rx EVO Big Wheel and Mag...
$10.99
... more info
Primary Belt that goes around Clutch Sprocket (also known as the Front Belt on all Gas Scooters) CLICK HERE FOR HEAVY DUTY VERSION
$24.99 $17.99
Save: 28% off
Add:
Heavy Duty Belts made in the USA last up to 50% longer than generic belts. Primary Belt that goes around Clutch (and Speed) Sprocket (also known as...
$29.99 $24.99
Save: 17% off
Add:
Heavy Duty Belts made in the USA last up to 50% longer than generic belts. Longer belt for larger Speed Sprockets This is the Primary Belt that goes...
$32.99
Add:
Primary Belt that goes around Clutch Sprocket on XL50 For older XL50 and 52cc Powerboards, go here: 2009 and Older Clutch belt
$19.99
Add:
Clutch Drum Assembly Includes: Clutch Shaft $39.99 Clutch Bearing Cup Holder $24.99 Clutch Drum Bell Housing $34.99 2 Clutch Shaft Bearings $19.99 1...
$109.96
... more info
Clutch Drum Assembly Includes: Clutch Bell Drum $29.99 3.5 inch Clutch Shaft $33.99 Clutch Bearing Cup Holder $24.99 1 Clutch Shaft Snap Rings $9.99...
$98.99
... more info
Clutch Drum Bell housing Fits: Powerboard 49 Powerboard 50 Mag Wheel Powerboard 2 speed Mag Wheel 2 speed
$29.99
Add:
Clutch Drum Bell housing Fits: Moby S XL Comp RR 33 35 40 43 47
$34.99
Add:
Clutch Shaft ORDER YOURS NOW 3 and 1/2 inch shaft plus bearings and snap ring If you have a Moby XL CruzR 35, 40 or 47 you will need the part number...
$59.99
Add:
Clutch Shaft for 2 speed and other 49cc models with and without 2 speed transmission.
$29.99
Add:
This is the longer clutch shaft found on the Cruz'R scooters and some XL and XL Comp models. It comes with bearings and snap ring. If you have a Moby...
$59.99
Add:
Clutch Shaft for Moby gas scooters Includes bearings and snap ring 30838 3.5inch Moby S 33 35 and 40 If you have a Moby XL CruzR 35, 40 or 47 you...
$59.99
Add:
Replacement Clutch Shoes and Spring Washers and Bolts included
$49.99
... more info
Replacement Clutch Shoes and Spring A and B Washers and Bolts included
$59.99
Add:
Replacement Clutch Shoes, Spring and Washers Bolts must be purchased separately
$39.99
Add:
Replacement Clutch Shoes, Spring and Washers Bolts must be purchased separately
$35.99
... more info
Two Clutch Shoes Choose your engine size below
$29.99
... more info
Clutch Sprocket goes on the clutch shaft - standard size is 15 tooth Please check out SPEED SPROCKETS
$29.99
Add:
One Set of Clutch Washers. These will include WAVE washers if applicable
$5.99
... more info